Building Structures of Buildings and Constructions (курсова робота)

Major: Architecture and Town Planning
Code of subject: 6.191.01.E.086
Credits: 2.00
Department: Building Constructions and Bridges
Lecturer: Ph.D., docent. Andrii P. Kramarchuk
Semester: 7 семестр
Mode of study: денна
Мета вивчення дисципліни: Be able to design load-bearing metal and reinforced concrete structures of a multi-story building of the elm system with an incomplete frame according to the following initial data: the purpose of the building and the place of construction, the dimensions of the building in the plan, the number and height of floors; Be able to draw out calculated metal and reinforced concrete structures according to the rules of the ESKD; Be able to choose additional data for calculations according to the current DBN.
Завдання: The study of an educational discipline involves the formation of competencies in students of education: general competences: K01. Possession of a culture of thinking, the ability to generalize, analyze, perceive information, set a goal and choose ways to achieve it K03. Ability to find organizational and management solutions and be ready to bear responsibility for them, have professional communication skills, interaction with other people, ability to work in groups K04. Ability to use legislative, directive, normative, legal documents in one's activity professional competences: FK1 Basic knowledge of fundamental sciences, to the extent necessary for mastering general professional disciplines FC2 Basic knowledge in the field of architecture and urban planning is necessary for mastering professionally oriented disciplines FK6 Knowledge of scientific concepts, theories and methods in the field of building renovation FK8 Competence in execution of architectural and urban planning working drawings FC 10 The ability to professionally present a project - report on the essence of the project, oppose the review, explain individual provisions of the project
Learning outcomes: RN 2 Knowledge of state design and sanitary-hygienic norms on the basis of which pre-project analysis, calculations, search, sketch and working architectural and urban planning are carried out RN 8 Knowledge of basic structural systems, engineering equipment of buildings, operational and aesthetic characteristics of building materials. RN 12 To be able to design buildings and structures, including as part of a design team.
Required prior and related subjects: Previous academic disciplines Basics of the theory of structures Structures of a single-family house Arch. structures of buildings and structures Design of a single-family house Associated educational disciplines Urban design of a new settlement Architectural design of a public building
Summary of the subject: The amount of study time for studying the discipline "Construction structures of buildings and structures" is determined by state requirements and is 60 academic hours (2.0 ECTS credits). The form of final control of knowledge is differentiated assessment.
Опис: To choose rational schemes and make sketch plans of steel and monolithic ribbed floor and cross-section of the house with external load-bearing brick walls and internal steel and monolithic reinforced concrete frame; to execute calculations of the metal floor beam, the girder, and the column of the first floor from the rolled profiles and the support unit of the girder on the support table of the column; to execute the calculation of the slab as part of the monolithic ribbed floor, to cross out the plan of the steel floor, the cross-section of the house in a steel frame, construction of a metal girder and a column of the first floor, nodes supporting the girder on the support table of the column, and the column on the monolithic foundation, formwork drawing of a monolithic reinforced concrete floor with schemes of reinforcement (layout of reinforcing grids) of a monolithic reinforced concrete plate, cross-sections, working drawings of reinforcing products - grids, frameworks, cross-section of the house in the reinforced concrete version, specification for the installation of a monolithic reinforced concrete slab as part of a monolithic ribbed floor, main units for a monolithic reinforced concrete slab (on two sheets A2)
Assessment methods and criteria: Lectures and practical classes: information-receptive method; reproductive method; heuristic method; problem statement method. Independent work: reproductive method.
Критерії оцінювання результатів навчання: Current control (20%) is evaluated by one component: the checking the progress of course work during the semester (20 points) Final control (80%): Defense of course work according to the individual task (explanatory note and two sheets of drawings).
Recommended books: 1.ДБН В.1.2-2:2006. Навантаження і впливи. 2006, Київ. 2. ДБН В.2.6-198:2014 «Сталеві конструкції» Норми проектування. 3. Клименко Ф.Є., Барабаш В.М., Стороженко Л.І. Металеві конструкції / За ред. Ф.Є. Клименка: Підручник. – 2-е видання, випр. і доп. – Львів: Світ, 2002. – 312с. 4. ДБН В.2.6-98: 2009 Бетонні та залізобетонні конструкції. 5. Стасюк М.І. Залізобетонні конструкції. Ч. І. Основи розрахунку залізобетонних конструкцій за граничними станами. ?.: ІЗМН, 1997. - 272с. 6. ДСТУ Б В. 1.2.-3: 2006. Вимоги проектування.- К.: Мінбуд України, 2006.- Юс. 7. А.П.Крамарчук, Б,М,Ільницький, Т.В.Бобало Будівельні конструкції, Навчальний посібник. Рекомендувала Науково-методична рада Національного університету «Львівська політехніка». Львів, Видавництво Львівської політехніки 2016 р. 8.Крамарчук А.П. Будівельні конструкції. Методичні рекомендації для виконання практичних занять для студентів напрямку 6.170203 «Пожежна безпека» А.П. Крамарчук, Б.М. Ільницький, Т. В. Бобало, М.Е. Волинець, 2015. – 45с. 9. Розрахунок тримальних контрукцій багатоповерхового будинку з неповним каркасом. Частина 1. Розрахунок і конструювання металевих конструкцій. МЕТОДИЧНІ ВКАЗІВКИ до курсової роботи з дисципліни «Будівельні конструкції» для студентів базової вищої освіти за напрямом 6.060101 «Будівництво». Львів 2015. 10. Розрахунок тримальних контрукцій багатоповрехового будинку з неповним каркасом. Частина 2. Розрахунок і конструювання залізобетонних та кам’яних конструкцій. МЕТОДИЧНІ ВКАЗІВКИ до курсової роботи з дисципліни «Будівельні конструкції» для студентів базової вищої освіти за напрямом 6.060101 «Будівництво». Львів 2016. 11.Електронний навчально-методичний комплекс «Будівельні конструкції»,http: //vns.lp/edu.ua/course/view.phpid=8027, E41-192-63/2016 від 26.09.2016р.

Building Structures of Buildings and Constructions (курсова робота)

Major: Architecture and Town Planning
Code of subject: 6.191.02.E.111
Credits: 2.00
Department: Building Constructions and Bridges
Lecturer: Ph.D., docent. Andrii P. Kramarchuk
Semester: 7 семестр
Mode of study: денна
Мета вивчення дисципліни: Be able to design load-bearing metal and reinforced concrete structures of a multi-story building of the elm system with an incomplete frame according to the following initial data: the purpose of the building and the place of construction, the dimensions of the building in the plan, the number and height of floors; Be able to draw out calculated metal and reinforced concrete structures according to the rules of the ESKD; Be able to choose additional data for calculations according to the current DBN.
Завдання: The study of an educational discipline involves the formation of competencies in students of education: general competences: K01. Possession of a culture of thinking, the ability to generalize, analyze, perceive information, set a goal and choose ways to achieve it K03. Ability to find organizational and management solutions and be ready to bear responsibility for them, have professional communication skills, interaction with other people, ability to work in groups K04. Ability to use legislative, directive, normative, legal documents in one's activity professional competences: FK1 Basic knowledge of fundamental sciences, to the extent necessary for mastering general professional disciplines FC2 Basic knowledge in the field of architecture and urban planning is necessary for mastering professionally oriented disciplines FK6 Knowledge of scientific concepts, theories and methods in the field of building renovation FK8 Competence in execution of architectural and urban planning working drawings FC 10 The ability to professionally present a project - report on the essence of the project, oppose the review, explain individual provisions of the proje
Learning outcomes: RN 2 Knowledge of state design and sanitary-hygienic norms on the basis of which pre-project analysis, calculations, search, sketch and working architectural and urban planning are carried out RN 8 Knowledge of basic structural systems, engineering equipment of buildings, operational and aesthetic characteristics of building materials. RN 12 To be able to design buildings and structures, including as part of a design team.
Required prior and related subjects: Previous academic disciplines Basics of the theory of structures Structures of a single-family house Arch. structures of buildings and structures Design of a single-family house Associated educational disciplines Urban design of a new settlement Architectural design of a public building
Summary of the subject: The amount of study time for studying the discipline "Construction structures of buildings and structures" is determined by state requirements and is 60 academic hours (2.0 ECTS credits). The form of final control of knowledge is differentiated assessment.
Опис: To choose rational schemes and make sketch plans of steel and monolithic ribbed floor and cross-section of the house with external load-bearing brick walls and internal steel and monolithic reinforced concrete frame; to execute calculations of the metal floor beam, the girder, and the column of the first floor from the rolled profiles and the support unit of the girder on the support table of the column; to execute the calculation of the slab as part of the monolithic ribbed floor, to cross out the plan of the steel floor, the cross-section of the house in a steel frame, construction of a metal girder and a column of the first floor, nodes supporting the girder on the support table of the column, and the column on the monolithic foundation, formwork drawing of a monolithic reinforced concrete floor with schemes of reinforcement (layout of reinforcing grids) of a monolithic reinforced concrete plate, cross-sections, working drawings of reinforcing products - grids, frameworks, cross-section of the house in the reinforced concrete version, specification for the installation of a monolithic reinforced concrete slab as part of a monolithic ribbed floor, main units for a monolithic reinforced concrete slab (on two sheets A2)
Assessment methods and criteria: Lectures and practical classes: information-receptive method; reproductive method; heuristic method; problem statement method. Independent work: reproductive method.
Критерії оцінювання результатів навчання: Current control (20%) is evaluated by one component: the checking the progress of course work during the semester (20 points) Final control (80%): Defense of course work according to the individual task (explanatory note and two sheets of drawings).
Recommended books: 1.ДБН В.1.2-2:2006. Навантаження і впливи. 2006, Київ. 2. ДБН В.2.6-198:2014 «Сталеві конструкції» Норми проектування. 3. Клименко Ф.Є., Барабаш В.М., Стороженко Л.І. Металеві конструкції / За ред. Ф.Є. Клименка: Підручник. – 2-е видання, випр. і доп. – Львів: Світ, 2002. – 312с. 4. ДБН В.2.6-98: 2009 Бетонні та залізобетонні конструкції. 5. Стасюк М.І. Залізобетонні конструкції. Ч. І. Основи розрахунку залізобетонних конструкцій за граничними станами. ?.: ІЗМН, 1997. - 272с. 6. ДСТУ Б В. 1.2.-3: 2006. Вимоги проектування.- К.: Мінбуд України, 2006.- Юс. 7. А.П.Крамарчук, Б,М,Ільницький, Т.В.Бобало Будівельні конструкції, Навчальний посібник. Рекомендувала Науково-методична рада Національного університету «Львівська політехніка». Львів, Видавництво Львівської політехніки 2016 р. 8.Крамарчук А.П. Будівельні конструкції. Методичні рекомендації для виконання практичних занять для студентів напрямку 6.170203 «Пожежна безпека» А.П. Крамарчук, Б.М. Ільницький, Т. В. Бобало, М.Е. Волинець, 2015. – 45с. 9. Розрахунок тримальних контрукцій багатоповерхового будинку з неповним каркасом. Частина 1. Розрахунок і конструювання металевих конструкцій. МЕТОДИЧНІ ВКАЗІВКИ до курсової роботи з дисципліни «Будівельні конструкції» для студентів базової вищої освіти за напрямом 6.060101 «Будівництво». Львів 2015. 10. Розрахунок тримальних контрукцій багатоповрехового будинку з неповним каркасом. Частина 2. Розрахунок і конструювання залізобетонних та кам’яних конструкцій. МЕТОДИЧНІ ВКАЗІВКИ до курсової роботи з дисципліни «Будівельні конструкції» для студентів базової вищої освіти за напрямом 6.060101 «Будівництво». Львів 2016. 11.Електронний навчально-методичний комплекс «Будівельні конструкції»,http: //vns.lp/edu.ua/course/view.phpid=8027, E41-192-63/2016 від 26.09.2016р.

Building Structures of Buildings and Constructions (курсова робота)

Major: Architecture and Town Planning
Code of subject: 6.191.03.E.129
Credits: 2.00
Department: Building Constructions and Bridges
Lecturer: Ph.D., docent. Andrii P. Kramarchuk
Semester: 7 семестр
Mode of study: денна
Мета вивчення дисципліни: Be able to design load-bearing metal and reinforced concrete structures of a multi-story building of the elm system with an incomplete frame according to the following initial data: the purpose of the building and the place of construction, the dimensions of the building in the plan, the number and height of floors; Be able to draw out calculated metal and reinforced concrete structures according to the rules of the ESKD; Be able to choose additional data for calculations according to the current DBN.
Завдання: The study of an educational discipline involves the formation of competencies in students of education: general competences: K01. Possession of a culture of thinking, the ability to generalize, analyze, perceive information, set a goal and choose ways to achieve it K03. Ability to find organizational and management solutions and be ready to bear responsibility for them, have professional communication skills, interaction with other people, ability to work in groups K04. Ability to use legislative, directive, normative, legal documents in one's activity professional competences: FK1 Basic knowledge of fundamental sciences, to the extent necessary for mastering general professional disciplines FC2 Basic knowledge in the field of architecture and urban planning is necessary for mastering professionally oriented disciplines FK6 Knowledge of scientific concepts, theories and methods in the field of building renovation FK8 Competence in execution of architectural and urban planning working drawings FC 10 The ability to professionally present a project - report on the essence of the project, oppose the review, explain individual provisions of the project
Learning outcomes: RN 2 Knowledge of state design and sanitary-hygienic norms on the basis of which pre-project analysis, calculations, search, sketch and working architectural and urban planning are carried out RN 8 Knowledge of basic structural systems, engineering equipment of buildings, operational and aesthetic characteristics of building materials. RN 12 To be able to design buildings and structures, including as part of a design team.
Required prior and related subjects: Previous academic disciplines Basics of the theory of structures Structures of a single-family house Arch. structures of buildings and structures Design of a single-family house Associated educational disciplines Urban design of a new settlement Architectural design of a public building
Summary of the subject: The amount of study time for studying the discipline "Construction structures of buildings and structures" is determined by state requirements and is 60 academic hours (2.0 ECTS credits). The form of final control of knowledge is differentiated assessment.
Опис: To choose rational schemes and make sketch plans of steel and monolithic ribbed floor and cross-section of the house with external load-bearing brick walls and internal steel and monolithic reinforced concrete frame; to execute calculations of the metal floor beam, the girder, and the column of the first floor from the rolled profiles and the support unit of the girder on the support table of the column; to execute the calculation of the slab as part of the monolithic ribbed floor, to cross out the plan of the steel floor, the cross-section of the house in a steel frame, construction of a metal girder and a column of the first floor, nodes supporting the girder on the support table of the column, and the column on the monolithic foundation, formwork drawing of a monolithic reinforced concrete floor with schemes of reinforcement (layout of reinforcing grids) of a monolithic reinforced concrete plate, cross-sections, working drawings of reinforcing products - grids, frameworks, cross-section of the house in the reinforced concrete version, specification for the installation of a monolithic reinforced concrete slab as part of a monolithic ribbed floor, main units for a monolithic reinforced concrete slab (on two sheets A2)
Assessment methods and criteria: Lectures and practical classes: information-receptive method; reproductive method; heuristic method; problem statement method. Independent work: reproductive method.
Критерії оцінювання результатів навчання: Current control (20%) is evaluated by one component: the checking the progress of course work during the semester (20 points) Final control (80%): Defense of course work according to the individual task (explanatory note and two sheets of drawings).
Recommended books: 1.ДБН В.1.2-2:2006. Навантаження і впливи. 2006, Київ. 2. ДБН В.2.6-198:2014 «Сталеві конструкції» Норми проектування. 3. Клименко Ф.Є., Барабаш В.М., Стороженко Л.І. Металеві конструкції / За ред. Ф.Є. Клименка: Підручник. – 2-е видання, випр. і доп. – Львів: Світ, 2002. – 312с. 4. ДБН В.2.6-98: 2009 Бетонні та залізобетонні конструкції. 5. Стасюк М.І. Залізобетонні конструкції. Ч. І. Основи розрахунку залізобетонних конструкцій за граничними станами. ?.: ІЗМН, 1997. - 272с. 6. ДСТУ Б В. 1.2.-3: 2006. Вимоги проектування.- К.: Мінбуд України, 2006.- Юс. 7. А.П.Крамарчук, Б,М,Ільницький, Т.В.Бобало Будівельні конструкції, Навчальний посібник. Рекомендувала Науково-методична рада Національного університету «Львівська політехніка». Львів, Видавництво Львівської політехніки 2016 р. 8.Крамарчук А.П. Будівельні конструкції. Методичні рекомендації для виконання практичних занять для студентів напрямку 6.170203 «Пожежна безпека» А.П. Крамарчук, Б.М. Ільницький, Т. В. Бобало, М.Е. Волинець, 2015. – 45с. 9. Розрахунок тримальних контрукцій багатоповерхового будинку з неповним каркасом. Частина 1. Розрахунок і конструювання металевих конструкцій. МЕТОДИЧНІ ВКАЗІВКИ до курсової роботи з дисципліни «Будівельні конструкції» для студентів базової вищої освіти за напрямом 6.060101 «Будівництво». Львів 2015. 10. Розрахунок тримальних контрукцій багатоповрехового будинку з неповним каркасом. Частина 2. Розрахунок і конструювання залізобетонних та кам’яних конструкцій. МЕТОДИЧНІ ВКАЗІВКИ до курсової роботи з дисципліни «Будівельні конструкції» для студентів базової вищої освіти за напрямом 6.060101 «Будівництво». Львів 2016. 11.Електронний навчально-методичний комплекс «Будівельні конструкції»,http: //vns.lp/edu.ua/course/view.phpid=8027, E41-192-63/2016 від 26.09.2016р.

Building Structures of Buildings and Constructions (курсова робота)

Major: Architecture and Town Planning
Code of subject: 6.191.04.E.147
Credits: 2.00
Department: Building Constructions and Bridges
Lecturer: Ph.D., docent. Andrii P. Kramarchuk
Semester: 7 семестр
Mode of study: денна
Мета вивчення дисципліни: Be able to design load-bearing metal and reinforced concrete structures of a multi-story building of the elm system with an incomplete frame according to the following initial data: the purpose of the building and the place of construction, the dimensions of the building in the plan, the number and height of floors; Be able to draw out calculated metal and reinforced concrete structures according to the rules of the ESKD; Be able to choose additional data for calculations according to the current DBN.
Завдання: The study of an educational discipline involves the formation of competencies in students of education: general competences: K01. Possession of a culture of thinking, the ability to generalize, analyze, perceive information, set a goal and choose ways to achieve it K03. Ability to find organizational and management solutions and be ready to bear responsibility for them, have professional communication skills, interaction with other people, ability to work in groups K04. Ability to use legislative, directive, normative, legal documents in one's activity professional competences: FK1 Basic knowledge of fundamental sciences, to the extent necessary for mastering general professional disciplines FC2 Basic knowledge in the field of architecture and urban planning is necessary for mastering professionally oriented disciplines FK6 Knowledge of scientific concepts, theories and methods in the field of building renovation FK8 Competence in execution of architectural and urban planning working drawings FC 10 The ability to professionally present a project - report on the essence of the project, oppose the review, explain individual provisions of the project
Learning outcomes: RN 2 Knowledge of state design and sanitary-hygienic norms on the basis of which pre-project analysis, calculations, search, sketch and working architectural and urban planning are carried out RN 8 Knowledge of basic structural systems, engineering equipment of buildings, operational and aesthetic characteristics of building materials. RN 12 To be able to design buildings and structures, including as part of a design team.
Required prior and related subjects: Previous academic disciplines Basics of the theory of structures Structures of a single-family house Arch. structures of buildings and structures Design of a single-family house Associated educational disciplines Urban design of a new settlement Architectural design of a public building
Summary of the subject: The amount of study time for studying the discipline "Construction structures of buildings and structures" is determined by state requirements and is 60 academic hours (2.0 ECTS credits). The form of final control of knowledge is differentiated assessment.
Опис: To choose rational schemes and make sketch plans of steel and monolithic ribbed floor and cross-section of the house with external load-bearing brick walls and internal steel and monolithic reinforced concrete frame; to execute calculations of the metal floor beam, the girder, and the column of the first floor from the rolled profiles and the support unit of the girder on the support table of the column; to execute the calculation of the slab as part of the monolithic ribbed floor, to cross out the plan of the steel floor, the cross-section of the house in a steel frame, construction of a metal girder and a column of the first floor, nodes supporting the girder on the support table of the column, and the column on the monolithic foundation, formwork drawing of a monolithic reinforced concrete floor with schemes of reinforcement (layout of reinforcing grids) of a monolithic reinforced concrete plate, cross-sections, working drawings of reinforcing products - grids, frameworks, cross-section of the house in the reinforced concrete version, specification for the installation of a monolithic reinforced concrete slab as part of a monolithic ribbed floor, main units for a monolithic reinforced concrete slab (on two sheets A2)
Assessment methods and criteria: Lectures and practical classes: information-receptive method; reproductive method; heuristic method; problem statement method. Independent work: reproductive method.
Критерії оцінювання результатів навчання: Current control (20%) is evaluated by one component: the checking the progress of course work during the semester (20 points) Final control (80%): Defense of course work according to the individual task (explanatory note and two sheets of drawings).
Recommended books: 1.ДБН В.1.2-2:2006. Навантаження і впливи. 2006, Київ. 2. ДБН В.2.6-198:2014 «Сталеві конструкції» Норми проектування. 3. Клименко Ф.Є., Барабаш В.М., Стороженко Л.І. Металеві конструкції / За ред. Ф.Є. Клименка: Підручник. – 2-е видання, випр. і доп. – Львів: Світ, 2002. – 312с. 4. ДБН В.2.6-98: 2009 Бетонні та залізобетонні конструкції. 5. Стасюк М.І. Залізобетонні конструкції. Ч. І. Основи розрахунку залізобетонних конструкцій за граничними станами. ?.: ІЗМН, 1997. - 272с. 6. ДСТУ Б В. 1.2.-3: 2006. Вимоги проектування.- К.: Мінбуд України, 2006.- Юс. 7. А.П.Крамарчук, Б,М,Ільницький, Т.В.Бобало Будівельні конструкції, Навчальний посібник. Рекомендувала Науково-методична рада Національного університету «Львівська політехніка». Львів, Видавництво Львівської політехніки 2016 р. 8.Крамарчук А.П. Будівельні конструкції. Методичні рекомендації для виконання практичних занять для студентів напрямку 6.170203 «Пожежна безпека» А.П. Крамарчук, Б.М. Ільницький, Т. В. Бобало, М.Е. Волинець, 2015. – 45с. 9. Розрахунок тримальних контрукцій багатоповерхового будинку з неповним каркасом. Частина 1. Розрахунок і конструювання металевих конструкцій. МЕТОДИЧНІ ВКАЗІВКИ до курсової роботи з дисципліни «Будівельні конструкції» для студентів базової вищої освіти за напрямом 6.060101 «Будівництво». Львів 2015. 10. Розрахунок тримальних контрукцій багатоповрехового будинку з неповним каркасом. Частина 2. Розрахунок і конструювання залізобетонних та кам’яних конструкцій. МЕТОДИЧНІ ВКАЗІВКИ до курсової роботи з дисципліни «Будівельні конструкції» для студентів базової вищої освіти за напрямом 6.060101 «Будівництво». Львів 2016. 11.Електронний навчально-методичний комплекс «Будівельні конструкції»,http: //vns.lp/edu.ua/course/view.phpid=8027, E41-192-63/2016 від 26.09.2016р.

Building Structures of Buildings and Constructions

Major: Architecture and Town Planning
Code of subject: 6.191.00.O.125
Credits: 4.00
Department: Building Constructions and Bridges
Lecturer: Ph.D., docent. Andrii P. Kramarchuk
Semester: 7 семестр
Mode of study: денна
Мета вивчення дисципліни: The purpose of studying the discipline is the student's ability to perform the simplest tasks in the calculation of metal, reinforced concrete and wooden structures (calculation of bent and compressed elements), to know the characteristics of the materials used for the manufacture of metal, reinforced concrete and wooden structures and the peculiarities of their operation under various stresses became
Завдання: The task of studying the discipline "Construction of buildings and structures" is to prepare a bachelor's specialist who knows: a) basic provisions regarding the calculation of construction structures and foundations of buildings and structures, characteristics of materials used for the manufacture of metal, reinforced concrete and wooden structures, features of their operation under various stress states; b) classification of construction structures and their role in the creation of various frames as the structural basis of buildings and structures; c) calculation and construction of the most important types of connections using electric arc welding, bolts and rivets; d) calculation of elements of metal, reinforced concrete and wooden structures using the method of limit states under the influence of various force factors: axial and shear forces, bending moments and their combinations; e) the main questions of the general theory of calculation of structures, is able to provide recommendations on the design and construction of individual elements of civil and industrial buildings. The study of an educational discipline involves the formation of competencies in students of education: general competences: K01. Possession of a culture of thinking, the ability to generalize, analyze, perceive information, set a goal and choose ways to achieve it K03. Ability to find organizational and management solutions and be ready to bear responsibility for them, have professional communication skills, interaction with other people, ability to work in groups K04. Ability to use legislative, directive, normative, legal documents in one's activity professional competences: FK1 Basic knowledge of fundamental sciences, to the extent necessary for mastering general professional disciplines FC2 Basic knowledge in the field of architecture and urban planning is necessary for mastering professionally oriented disciplines FK6 Knowledge of scientific concepts, theories and methods in the field of building renovation FK8 Competence in execution of architectural and urban planning working drawings FC 10 The ability to professionally present a project - report on the essence of the project, oppose the review, explain individual provisions of the project
Learning outcomes: RN 2 Knowledge of state design and sanitary-hygienic norms on the basis of which pre-project analysis, calculations, search, sketch and working architectural and urban planning are carried out RN 8 Knowledge of basic structural systems, engineering equipment of buildings, operational and aesthetic characteristics of building materials. RN 12 To be able to design buildings and structures, including as part of a design team
Required prior and related subjects: Previous academic disciplines Basics of the theory of structures Structures of a single-family house Arch. structures of buildings and structures Design of a single-family house Associated educational disciplines Urban design of a new settlement Architectural design of a public building
Summary of the subject: The educational discipline "Construction of buildings and structures" is a regulatory discipline that is included in curricula as a mandatory discipline from the professional training cycle. The amount of study time for studying the discipline "Construction structures of buildings and structures" is determined by state requirements and is 90 academic hours (3.0 ECTS credits), of which 56 hours are allocated to classroom classes and 34 hours are independent work of students. In the process of mastering the educational material, students perform course work. The form of final control of knowledge is an exam. As a result of studying the discipline, students should: - familiarize themselves with normative and technical literature; to know the general principles of calculations for the design of building structures (metal, reinforced concrete, wooden), to have the basics of calculations for the I and II groups of limit states.
Опис: Topic 1.1 Structural elements of buildings and structures and the main provisions for their calculation Topic 1.2 Basic principles of calculation of building structures and soil foundations for houses and structures. Topic 1.3 Loads and influences. Classification of loads and their combination. Permanent and technological loads. Atmospheric loads. Normative and calculated loads. Normative and calculated strength characteristics of materials for building structures. Topic 2.1 General information about metal structures and materials for them. Topic 2.2 Calculation of elements under conditions of various force influences. Elements that are loaded by axial force. Topic 2.3 Bent elements. Topic 2.4 Eccentrically stretched, eccentrically compressed and compressed-bent elements. Topic 2.5 Connections in metal structures. Topic 2.6 Connections in metal structures. Electrowelded joints. Topic 3.1 General information about reinforced concrete structures and their elements. Topic 3.2 Materials for reinforced concrete structures: concrete and its physical and mechanical properties. Topic 3.3 Reinforcement and its properties. Topic 3.4 Reinforced concrete and its properties. Types of reinforced concrete. Coupling of reinforcement with concrete. Questionnaire area. Shrinkage and creep of reinforced concrete. Topic 3.5 Fundamentals of the theory of calculation of reinforced concrete structures. Topic 3.6 Calculation of normal sections of bent reinforced concrete elements of a rectangular profile with single reinforcement. Topic 3.7 Calculation of normal breaks of bent reinforced concrete elements of T-shaped profile with single reinforcement. Topic 3.8 Calculation of inclined sections of reinforced concrete bent elements in the area of action of transverse forces. Topic 3.9 Flat beam reinforced concrete floors. Calculation and construction of the working armature of the column shaft. Topic 4.1 General information about wood. Topic 4.2 General information about wood. Topic 4.3 Calculation of elements of wooden structures.
Assessment methods and criteria: Lectures and practical classes: information-receptive method; reproductive method; heuristic method; problem statement method. Independent work: reproductive method.
Критерії оцінювання результатів навчання: Current control is assessed by two components: performance of tasks (15 points) and oral survey (5 points) Examination control includes two stages: test control in the environment of the Emergency Situations Service (40 points) and an ESSE-type ticket - 40 points.
Recommended books: 7. Навчально-методичне забезпечення 1 Розрахунок тримальних контрукцій багатоповерхового будинку з неповним каркасом. Частина 1. Розрахунок і конструювання металевих конструкцій. МЕТОДИЧНІ ВКАЗІВКИ до курсової роботи з дисципліни «Будівельні конструкції» для студентів базової вищої освіти за напрямом 6.060101 «Будівництво». Львів 2015 2 Розрахунок тримальних контрукцій багатоповрехового будинку з неповним каркасом. Частина 2. Розрахунок і конструювання залізобетонних та кам’яних конструкцій. МЕТОДИЧНІ ВКАЗІВКИ до курсової роботи з дисципліни «Будівельні конструкції» для студентів базової вищої освіти за напрямом 6.060101 «Будівництво». Львів 2016 3 Залізобетонні конструкції будівель та споруд. МЕТОДИЧНІ ВКАЗІВКИ до виконання розрахунково-графічної роботи для стулентів спеціальностей 8.06010201, 8.06010202, 8.06010203 «Архітектура будівель та споруд», «Містобудування», «Дизайн архітектурного середовища». Львів 2015. 4 БУДІВЕЛЬНІ КОНСТРУКЦІЇ. МЕТОДИЧНІ ВКАЗІВКИ для виконання практичних занять для студентів напряму 6.170203 «Пожежна безпека». Львів 2015. 5 Електронний навчально-методичний комплекс «Будівельні конструкції» Сертифікат №01742, адреса розміщення http://vns.lp.edu.ua/course/view.phpid=8027., укладачі Крамарчук Андрій Петрович, Ільницький Борис Мар’янович. 8. Рекомендована література Базова 1. Клименко Ф.Є., Барабаш В.М., Стороженко Л.І. Металеві конструкції / За ред. Ф.Є. Клименка: Підручник. – 2-е видання, випр. і доп. – Львів: Світ, 2002. – 312с. 2. А.П.Крамарчук, Б.М.Ільницький, Т.В.Бобало Будівельні конструкції. Львів. Видавництво Львівської політехніки 2016.-199с. 2. Бучок Ю.Ф. Будівельні конструкції: Основи розрахунку. – К.: Вища шк., 1994. 3. Бліхарський З.Я. Розрахунок і конструювання нормальних і похилих перерізів залізобетонних елементів. Навчальний посібник. З.Я. Бліхарський, І.І. Кархут, Р.Ф. Струк. Львів, 2014 С141. 4. Стасюк М.І. Залізобетонні конструкції. Ч.І. Основи розрахунку залізобетонних конструкцій за граничними станами: Навч. посібник. – К.: ІЗМН, 1997. – 272с. 6 Практичний розрахунок елементів залізобетонних конструкцій за ДБН В.2.6-98:2009 у порівнянні з розрахунками за СНиП 2.03.01-84* і EN 1992-1-1 (Eurocod 2) В.М. Бабаєв, А.М. Бамбура, О.М. Пустовойтова, П.А Резник, Є.Г.Стоянов, В.С.Шмуклер. Харків,ТОВ «Золоті сторінки», 2015. 7 Р.А. Шмиг, І. Добрянський, О.І.Грицина. Розрахунок металевих балок. Навчальний посібник. Львів 2016. 8 Мурашко Л.А., Колядкова В.М., Сморкалов Д.В. Розрахунок за міцністю перерізів нормальних та похилих до поздовжньої осі згинальних залізобетонних елементів за ДБН В.2.6-98: 2009 Бетонні та залізобетонні конструкції. 9 С.С. Гомон. Національний університет водного господарства та природокористування. Конструкції з дерева та пластмас. Навчальний посібник. Рівне 2016. Допоміжна 1. ДСТУ 3760:2006. Прокат арматурний для залізобетонних конструкцій. Загальні технічні умови.–К.: Держстандарт України, 2007.–20 с. 2. ДБН В.2.6-198:2014. Сталеві конструкції. Норми пректування, виготовлення і монтажу. – К.: Мінрегіонбуд України, 2014. – 199 с. 3. ДБН В.2.6-98:2009. Бетонні та залізобетонні конструкції. 4 ДСТУ Б В.2.6-156:2010. Бетонні та залізобетонні конструкції з важкого бетону. 5. ДБН В.1.2-2:2006. Навантаження і впливи. – К.: Мінбуд України, 2006.– 60 с. 6. ДСТУ Б В.1.2-3:2006. Прогини і переміщення..-К.: Мінбуд України, 2006.- 10с. 7. ДБН В.2.6-161:2010. Конструкції будинків і споруд. Дерев’яні конструкції / Мінрегіонбуд України. К:ДП Украрбудінформ, 2011. 9. Інформаційні ресурси. 1. Електронний навчально-методичний комплекс «Будівельні конструкції» Сертифікат №01742, адреса розміщення http://vns.lp.edu.ua/course/view.phpid=8027., укладачі Крамарчук Андрій Петрович, Ільницький Борис Мар’янович. 2. Електронний навчально-методичний комплекс «Будівельні конструкції будівлі та споруди», Кафедра будівельних конструкцій та мостів, адреса розміщення http://vns.lp.edu.ua/course/view.phpid=6324 укладачі Крамарчук Андрій Петрович, Ільницький Борис Мар’янович.